|
|
Rongsheng low melting point solid phase viscosity increasing drying equipment
Collect
Low Melting Point Solid Phase Adhesifier (RSB-SSP) Especially suitable for PET, PA6, PA66, PTT and other multi-batch slice adhesion drying RSB-SSP consists of: drum reactor, heat conduction oil heating and cooling system, vacuum system, electrical PLC(or DCS) control and so on.And optional: automatic feeding and conveying, pre-crystallization system in front of the kettle, automatic discharging and conveying, raw material dust screening, nitrogen protection, etc. Low melting point solid phase bonding device (RSB-SSP) can be according to the user's output and the characteristics of the variety, can adopt a single kettle process, all crystallization and reaction are completed in the drum reactor, save investment, cover less area, flexible variety replacement. If the outside crystallization system is selected, the time occupied by the raw material in the drum reactor can be saved and the production output can be increased. The intermittent solid phase viscosifier (RSB-SSP) does not need nitrogen protection during the whole process of solid phase condensation, which is convenient for users and energy saving. And does not add any chemical solvents and additives, environmental protection significance. Adhesive: new material PET, recycled material PET, PA6, PA66, PTT, PBT, PPS, PPL, PP, PE and other sections. Typical applications: chemical fiber industry filament, BCF, bottle packaging, special monofilament or composite fiber, special staple fiber, non-woven fabric, film film, engineering plastics, etc. And according to the user's research and development needs, can provide SSP experimental integrated device, users only need to power can use. Output: 10kg/ batch ~20t/ batch Characteristic viscosity: (according to the user's specific raw materials) PET IV: Max.1.2 Reference ton energy consumption: 350kWh /t~ 800kWh /t (according to the device and viscosity) |